How much concrete do you need?
Enter the slab size. Results update as you type.
Short answer
Multiply length by width in feet, multiply by thickness in feet (inches divided by 12), then divide by 27 to get cubic yards. Add about 10% for spillage and uneven ground. A 12 by 12 foot slab at 4 inches needs about 1.78 cubic yards, or 80 bags of 80 lb mix before waste.
Key facts
- An 80 lb bag of QUIKRETE Concrete Mix yields about 0.60 cubic feet; a 60 lb bag about 0.45 and a 40 lb bag about 0.30.[1]
- Family Handyman advises adding 10% to the calculated volume to allow for spillage and slab depth variations.[2]
- Fine Homebuilding advises ready-mix for any job of a yard or more, if a truck can reach the site and a batch plant is nearby.[3]
How the calculator works
The math is the same for a patio, a shed pad or a garage slab:
- Square feet = length (ft) x width (ft).
- Cubic feet = square feet x thickness (in) / 12.
- Cubic yards = cubic feet / 27. Ready-mix is ordered in cubic yards.
- Bags = cubic feet / bag yield, rounded up.
As a check, one cubic yard covers about 81 square feet of 4 inch slab[6].
Add extra for waste
Order more than the exact volume. Spills, low spots in the base and forms that bow out all eat concrete. Family Handyman advises adding 10% for spillage and slab depth variations[2]. On a small, well-formed pour on a flat, compacted base, some people use 5%. The calculator lets you pick none, 5% or 10%. Running short in the middle of a pour is worse than a few leftover bags.
Bag yields
QUIKRETE's data sheet for its standard Concrete Mix lists these yields[1]:
| Bag size | Yield per bag | Bags per cubic yard (27 cu ft) |
|---|---|---|
| 40 lb | 0.30 cu ft | 90 |
| 50 lb | 0.375 cu ft | 72 |
| 60 lb | 0.45 cu ft | 60 |
| 80 lb | 0.60 cu ft | 45 |
| 90 lb | 0.675 cu ft | 40 |
The bags-per-yard column is 27 divided by the yield. Other brands and specialty mixes can yield differently, so check the bag.
Worked examples at 4 inches thick
| Slab | Cubic feet | Cubic yards | 80 lb bags, no waste | 80 lb bags, with 10% |
|---|---|---|---|---|
| 10 x 10 ft | 33.3 | 1.23 | 56 | 62 |
| 12 x 12 ft | 48.0 | 1.78 | 80 | 88 |
| 20 x 20 ft | 133.3 | 4.94 | 223 | 245 |
Bags use the 0.60 cubic foot yield[1] and are rounded up. The 20 x 20 slab shows why big slabs are a ready-mix job: over 200 bags is far past what one crew can mix by hand before the first batches stiffen.
How many 80lb bags of concrete do I need for a 12x12 slab?
At 4 inches thick, 80 bags, or 88 with 10% extra. The math: 12 x 12 = 144 square feet. 144 x 4 / 12 = 48 cubic feet. 48 / 0.60 = 80 bags[1]. At 6 inches thick it doubles to 72 cubic feet, or 120 bags before waste. A 12 x 12 slab at 4 inches is about 1.78 cubic yards, which is past the one-yard point where Fine Homebuilding says ready-mix is the way to go[3].
How do I calculate concrete for a slab?
Measure length and width in feet and thickness in inches. Multiply length by width, multiply by thickness, divide by 12 to get cubic feet, then divide by 27 to get cubic yards. Add 10% for waste[2]. For bags, divide the cubic feet by the bag's yield, such as 0.60 for an 80 lb bag[1], and round up. For an odd shape, split it into rectangles, work out each one and add them.
Bags or ready-mix?
- Bags suit small pours: post holes, steps, small pads and repairs. You mix as you go and there is no delivery to schedule.
- Ready-mix suits anything around a yard or more. Fine Homebuilding says that for any job of a yard or more, ready-mix is the way to go, as long as there is access for a concrete truck and a batch plant nearby[3]. The same article notes forty 80 lb bags is almost a yard[3].
- Ask about fees. Suppliers may charge extra for small loads and for Saturday delivery, so ask before you order[2].
How thick should the slab be?
| Use | Typical thickness | Source |
|---|---|---|
| Sidewalk or walk | At least 4 in | QUIKRETE[4] |
| Patio or small pad | 4 to 6 in, depending on load | QUIKRETE[4]; HomeGuide[6] |
| Driveway, cars and SUVs | At least 4 in | ConcreteNetwork[5] |
| Driveway, trucks or RVs | 5 to 6 in | ConcreteNetwork[5] |
Thickness is a design choice, not just a math input. Local rules for driveways and approaches vary, and a slab carrying a building or hot tub should be sized by a contractor or designer.
When to call a pro
- Any pour of a cubic yard or more, where a crew and a ready-mix truck usually beat hand mixing.
- Driveways, garage floors and slabs that carry a structure or heavy equipment.
- Sites with clay soil, slopes or standing water, where base and drainage need planning.
- Any slab that needs a permit; a contractor in your area will know the local rules.
More questions
How many bags of concrete make a cubic yard?
A cubic yard is 27 cubic feet. Using QUIKRETE's yields [1], that is 45 bags of 80 lb mix, 60 bags of 60 lb mix or 90 bags of 40 lb mix.
What about thickened edges or a sloped base?
Work out each part as its own box (length x width x depth in feet) and add them. A slab with a thickened edge holds more concrete than its face size suggests, so measure the edge separately and keep the waste allowance on top.
Sources
- Concrete Mix, Product No. 1101 data sheet (revised October 2022), The QUIKRETE Companies. Accessed 2026-10-15.
- How to Estimate a Concrete Order (updated May 12, 2023), Family Handyman. Accessed 2026-10-15.
- Choosing the Right Bagged Concrete Mix (Andy Engel, Issue 290), Fine Homebuilding. Accessed 2026-10-15.
- Project: Concrete Sidewalks and Small Slabs, The QUIKRETE Companies. Accessed 2026-10-15.
- How Thick Should a Concrete Driveway Be? (August 17, 2023), ConcreteNetwork.com. Accessed 2026-10-15.
- How Much Does a Concrete Slab Cost? (updated February 3, 2026), HomeGuide. Accessed 2026-10-15.
Top Concrete Workers is an information and referral service run by Strive LeadGen LLC. We may be paid by contractors when we connect a homeowner with one; that never changes what we publish. Found an error? Tell us. We review safety and legal reports within 2 business days and all others within 7 days.